Lime plastering for period and solid-wall homes
Lime plastering and lime render repairs for period and solid-wall homes across Macclesfield, Cheshire, Derbyshire, South Manchester and Stoke. Breathable, traditional finishes.
Lime plaster is the traditional wall and ceiling finish for houses built before about 1919, and for many cottages, farmhouses and terraces built long after that. It sets slowly by taking carbon dioxide back from the air, stays slightly flexible, and lets moisture move through the wall and out again. That is why it suits solid brick and stone walls that were never built with a damp-proof course or cavity.
Why lime, not gypsum, on old walls
Gypsum plaster and cement renders are harder and far less breathable. On a solid wall they can trap moisture behind them, which shows up as blown plaster, salts, peeling paint and damp patches that keep coming back. Lime lets that moisture out, tolerates small movements in an older building and can be repaired in patches that blend with the original work.
What the work involves
- Taking off failed gypsum or cement where it is causing damp, and patching or replacing lime plaster that has come away.
- Haired lime base coats on laths or masonry, built up in coats with drying time between them.
- A smooth lime finish ready for breathable paints such as limewash, clay or mineral paints.
- Repairs to lath-and-plaster ceilings, keeping as much of the original as is sound.
Timing
Lime takes longer than gypsum: each coat needs to firm up before the next, and work in cold or very wet weather needs care. Work is sometimes booked as separate visits, a day for the base coats and another a week or two later for the finish. The quote sets out the stages so you know what to expect.