Lathing and lath-and-plaster repair

Timber lath, wood wool board and metal lath fixed and plastered in lime or gypsum, with repairs to lath-and-plaster ceilings and walls in period buildings across Cheshire and Derbyshire.

Lath is the base many old walls and ceilings were plastered on: thin strips of timber nailed to the frame, with gaps between them for the plaster to push through. When lath fails, is missing or was never right, the plaster over it follows. Lath can be repaired, replaced or fixed new, and then plastered in lime or gypsum to suit the building.

How plaster holds on a lath

On a ceiling, lime plaster is held by nibs: small amounts of plaster pushed through the gaps in the lath that fold over behind it like a mushroom. If the nibs break, the plaster can start to come away, and a ceiling that is visibly detaching is a safety problem to have looked at promptly. A hollow sound alone does not always mean the plaster has failed, especially where it is well haired, so it is worth inspecting before deciding to replace it.

What the work involves

Choosing the base

The right base depends on what is behind it: timber or masonry, how much air can move, whether the building is listed and what the finish will be. A visit and a look at the existing plaster settles it.

Questions people ask

What are nibs on a lath ceiling?

Nibs are the small pieces of plaster pushed through the gaps between the laths. They fold over behind the lath and hold the ceiling plaster up. If they break, the plaster can come away.

Does a hollow sound mean lime plaster has to come off?

Not always. Well haired lime plaster can hold together even where parts have come loose, so a hollow sound is a reason to inspect it. A ceiling that is visibly detaching needs prompt attention.

Can a lath ceiling be kept rather than taken down?

Often, yes. If the lath is sound the plaster can be repaired, and if the surface is poor the ceiling can be overboarded with plasterboard and skimmed, leaving the original in place.

Why use wood wool boards instead of lath?

They give a firm, breathable base for lime. Where air cannot circulate behind a wall, only one side of the board needs to carbonate, which simplifies the work.

From the blog

Get a quote

Tell us about the job through the quote form: room sizes and a few photos are enough for a first price, and you can see each room's cost before deciding.

Request a quote