Insulated lime plastering
Breathable lime-based insulating plasters on solid walls and ceilings: SuperTherm and Warmcote built up to 50mm and finished in lime, for period homes in Cheshire and the North West.
Solid walls and old ceilings lose heat, and the usual modern fix, foam or foil-backed board, stops them breathing. An insulating lime plaster adds some thermal performance while staying vapour-permeable, so moisture can still move through the wall. It is applied like a plaster and finished in lime, rather than as a separate board system.
How it is done
- Walls: SuperTherm insulating lime plaster on the inside face of external walls in a house in Prestbury, built up in three coats to a total of up to 50 mm, with traditional sand and lime plaster on the internal walls.
- Ceilings: on a stone cottage ceiling, the existing lath and plaster was overboarded and Warmcote, a lime-based insulating plaster, was applied directly to it, up to 50 mm in one pass, which is the maximum. It was then skimmed with a fine lime topcoat ready for decorating.
- Hemp lime: a floating coat of hemp lime plaster over stainless steel rib lath in a Grade II listed building in Manchester, chosen for its breathability and some thermal insulation.
When it is the right choice
It suits older buildings where internal wall insulation is wanted without trapping damp: solid stone and brick, cottages, and rooms where the original plaster has to come off anyway. It does reduce room size by the thickness of the coat, and it is not a substitute for dealing with damp or water ingress first.
Protecting the house
Floors and surrounding areas are covered before work starts and cleaned as the job moves through the property. Each coat needs time to firm up before the next, so the quote sets out the stages.